: +86 29 86033971   : zhao.wanbao@dcsxsm.com
You are here: Home » News » Knowledge » Construction machinery cardan shaft: General Workshop 5S Standard

Contact Us

 :  +86 29 86033971
 : +86 29 86033972
 zhao.wanbao@dcsxsm.com
 : The Innovation Industrial Park, No.36, Jingwei Road ,Xi'an Economic and Technological Development Zone,Xi'an City,Shaanxi Province,China
Industry News

Construction machinery cardan shaft: General Workshop 5S Standard

Views: 0     Author: Site Editor     Publish Time: 2022-09-21      Origin: Site

Construction machinery cardan shaft: General Workshop 5S Standard

1. Behavior discipline

1.1 Access the workshop hall

Standard: In and out of the workshop hall to close the door, open or close the door to push gently, do not hit, to avoid damage to the glass door.

1.2 Walk in the workshop channel

Standard: when commuters enter the workshop, they should walk in the middle of the right aisle. No playing or running quickly is allowed. More than 2 people can form a formation.

1.3 Private shoe cabinet

Standard: After changing shoes, you need to lock the private shoe cabinet. Do not open the door of the shoe cabinet at will for convenience. If the key of the shoe cabinet falls off, you need to register with the security officer and get the spare key for matching the lock.

1.4 Use of water dispenser

Standard: when receiving hot water, want to be careful by hot water scald; inside the faucet that faucet that uses red mark on the left is hot water, after receiving water, need to close the door of drinking machine cabinet gently. In addition, if there is tea in the water cup, do not pour it into the sink, please pour it into the bucket next to it.

1.5 Clean the ground in the tea room and shoe changing area

Standard: in the tea room to eat snacks, fruit Zest, etc. cannot be thrown on the ground, should be concentrated in the trash can.

1.6 Management of books and periodicals in tea room

Standard: After borrowing the books on the shelves, they should be neatly placed on the shelves and not taken out of the tea room.

1.7 Personal clothingfront axle u joint shaft company - Xinsanming

Standard: to work to wear clothes, do not wear shorts, capri pants into the workshop, do not wear jewelry, such as rings, necklaces, earrings, etc., boys do not grow long hair, girls need to tie their hair into the hat, enter the workshop to wear electrostatic clothes, buttons should be more than 4.

1.8 Working posture

Standard: knees naturally together, legs are placed or placed on the side, do not cross legs, at least two thirds of the chair, the distance between people should be at least 20CM; the stool is about 5cm away from the yellow line.

1.9 Brand name

Standard: the label issued by the company shall be filled in according to the requirements, and the handwriting shall be neat. The department column shall be uniformly written as "Overseas Workshop", and graffiti shall not be scrawled on it, and a one-inch photo of the individual shall be affixed. When working, you need to hang the brand on the right side of the corresponding work instruction and get it back by yourself after work.

1.10 stool placement

Standard: When working, the surface formed by the two feet on the outside of the stool should be parallel to the yellow line. The distance between the feet and the stool should be kept at about 1CM, and the yellow line should not be pressed. After work, the stool should be pushed into the assembly line, and the stool should be close to the air pipe under the pull.

1.11 Towel cleaning

Standard: The towel should be thoroughly cleaned with detergent or detergent once a day after 5S, and there should be no obvious stains on the washed towel.

1.12 Private goods management

Standard: Personal items, such as drinking water, snacks, skin care products, etc., cannot be brought into the workshop. Don't use your phone at work.

1.13 The company issued auxiliary materials management

Standard: The accessories issued by the company, such as electrostatic bracelets, electrostatic gloves, electrostatic shoes, should be properly kept by themselves, do not scribble on them, damage at will.

1.14 Operation process

Standard: No talking, laughing, or discussing things unrelated to work during work.

2. Identity management

2.1 Material identification

Standard: Label length 7.5cm, width 1.5cm, unified in the front of the material box card slot.

2.2 Identification on the assembly line

Standard: The width of the logo is 1cm. The length depends on the actual content of the logo, and is glued to the middle of the positioning cable.

2.3 Ground marking

Standard: The width of the logo is 4.5cm. The length depends on the actual content of the logo, and is glued to the middle of the positioning cable.

2.4 Status identification card

Standard: Mark 9.5cm long, 8.5cm wide, clamped on the revolving box to mark the status of the revolving box plate.

2.5 Entrance and exit plate identification

Standard: Sign diameter 10cm, in the door lock is 5cm above the place, affixed "push" sign, on the back of the door affixed "pull" sign, the height should be the same.

2.6 Electric cabinet safety identification

Standard: Sign length 6cm, height 8cm,

2.7 fire extinguisher indication logo

Standard: Sign length 30cm, height 15cm

2.8 Identification of smoke purifier equipment stop and operation

Standard: Sign length 1.5cm, width 1cm

2.9 flower pot positioning logo

Standard: The disk is uniformly positioned in a circular area with green adhesive 1cm long and 1cm wide, and labeled.

3. A billboard

3.1 Station plate

Standard: Size 20cm long, 15cm wide

3.2 line body tag

Standard: Length 58cm, width 35cm

3.3 Billboard

Standard: The height of the billboard in the workshop channel is 150cm, and the length is determined according to the actual content. The PVC board is mounted uniformly, with black frame, uniform Logo and background.

3.4 test equipment status identification plate

Standard: Size 20cm long, 15cm wide

4. Color management

4.1 Yellow

Standard: The yellow area is used to store items to be repaired, carts, containers, etc. It can also be used as the logo of the main passage of the workshop.

4.2 Red

Standard: Red area is used to locate defective products, trash cans, fire extinguishers, fire hydrants, hazardous areas, etc.

Quick Links

Products

Contact Us

  : +86 29 86033971
 : +86 29 86033972
  :  zhao.wanbao@dcsxsm.com
  : The Innovation Industrial Park, No.36, Jingwei Road ,Xi'an Economic and Technological Development Zone,Xi'an City,Shaanxi Province,China
Get In Touch
Copyright © Xi'an Xin Sanming Auto Parts Co.,Ltd All Rights Reserved. | Sitemap