Due to the different structure of various equipment, so the universal shaft length requirements are not the same. Designers ​sometimes very vexed, installation distance is too short afraid of universal shaft can not be made, installation distance is too long, and will worry about the concentricity of the whole shaft.

Universal transmission device is used to transfer power between two shafts whose relative position changes continuously during the working process. Its function is to connect the transmission output shaft and the main reducer input shaft not in the same straight line, and ensure that the Angle and distance

The friction heat generated by the friction between thermoplastic plastics is melted on the friction surface, and then the pressure is pressed, and the method of cooling under pressure is called friction welding. This method is most suitable for rotating body parts. Similar to friction welding of metals, one piece is fixed while the other rotates and pressure is applied.

As the old saying goes, "To do a good job, you must sharpen your tools." Today, he is given a broader meaning in modern manufacturing. In order to improve processing efficiency, it is very important to continuously optimize the "sharp tool" ---- CNC cutting tools. The following is a brief introduction to several ways to optimize props.

The benefits of standardization are obvious. In terms of the standardization of personnel operations, if there is no standardization of operations, the efforts of employees will not be unified with the overall development direction of the company, resulting in a lot of waste of manpower and material resources.